| SPECIFICATION & STANDARDS |
| ADSL DATA MODE |
- G.992.1 (G.DMT): Downstream
and Upstream data rates up to 8Mbps and 1Mbps.
- G.992.2 (G.Lite): Downstream and Upstream data rates up to
1.5Mbps and 512Kbps. |
| ATM PROTOCOL |
- WAN Mode Support: PPP Over
ATM (RFC2364) and PPP Over Ethernet (RFC 2516).
- LAN Mode Support: Routed/Bridge Ethernet Over ATM (RFC 1483).
- Classical Internet Protocol Over ATM (RFC 1577).
- Support ATM SAR, ATM AAL5, ATM Forum UNI3.1/4.0 PVC and support
up to 8 PVCs. |
| SWITCH INTERFACE |
- 4 Port 10/100Mbps Switch
Interface compliant.
- 10/100 Mbps Half/Full Duplex mode.
- Automatic MDI/MDIX crossover for 10/100 Base-T port.
- Auto-negotiation and speed-auto-sensing support.
- Extra high performance on up to 100 meters CAT5 UTP cable.
- Back-Pressure-Based flow control on Half Duplex mode.
- Pause-Frame-Based flow control on Full Duplex mode.
- Store-and-Forward switching mode.
- High performance lookup engine with support of up to 4096
MAC address entries with automatic learning and aging. |
| Bridge Mode |
- Ethernet to ADSL Self-Learning
Transparent Bridging.
- Supports up to 16 MAC Learning Addresses. |
| ROUTER MODE |
- IP routing RIPv2.
- Static routing.
- DHCP (Dynamic Host Configuration Protocol) Server and Client.
- NAT (Network Address Translation).
- ICMP (Internet Control Message Protocol). |
| Security |
|
- User authentication for PPP.
- PAP (Password Authentication Protocol) , CHAP (Challenge
Authentication Protocol).
- Password protected system management.
|
| Hardware Interface |
- USB 1.1 Compliant.
- One RJ-11 port for ADSL line connection.
- Four RJ-45 port for LAN connection.
- Provides 12V/1A DC Adaptor.
- RS-232 Console port (Optional). |
| SYSTEM REQUIREMENT
(FOR USB CONNECTION ONLY) |
- Windows 98SE/2000/ME/XP
Operation System.
- Pentium 166 MHz MMX-compatible PC or greater; 32 Mbytes RAM
or more; 50 Mbytes free disk space or more.
- Driver and Code upgraded via Amigo's website |
| Approval |
| - FCC Part 15/68, CE, K.21,
EN60950 3rd Ed. |
98
2000/XP