4-Port Wireless ADSL
Download
98 Me 2000/XP
notes：if any question ,please according to user manual
SPECIFICATION & STANDARDS
ADSL DATA MODE
- G.992.1 (G.DMT): Downstream and Upstream data rates up to 8Mbps and 1Mbps.
- G.992.2 (G.Lite): Downstream and Upstream data rates up to 1.5Mbps and 512Kbps.
ATM PROTOCOL
- WAN Mode Support: PPP Over ATM (RFC2364) and PPP Over Ethernet (RFC 2516).
- LAN Mode Support: Routed/Bridge Ethernet Over ATM (RFC 1483).
- Classical Internet Protocol Over ATM (RFC 1577).
- Support ATM SAR, ATM AAL5, ATM Forum UNI3.1/4.0 PVC and support up to 8 PVCs.
SWITCH INTERFACE
- 4 Port 10/100Mbps Switch Interface compliant with IEEE 802.3x standard.
- 10/100 Mbps Half/Full Duplex mode.
- Automatic MDI/MDIX crossover for 10/100 Base-T port.
- Auto-negotiation and speed-auto-sensing support.
- Extra high performance on up to 100 meters CAT5 UTP cable.
- Back-Pressure-Based flow control on Half Duplex mode.
- Pause-Frame-Based flow control on Full Duplex mode.
- Store-and-Forward switching mode.
- High performance lookup engine with support of up to 4096 MAC address entries with automatic learning and aging.
Bridge Mode
- Ethernet to ADSL Self-Learning Transparent Bridging (IEEE 802.1D).
- Supports up to 16 MAC Learning Addresses.
ROUTER MODE
- IP routing RIPv2.
- Static routing.
- DHCP (Dynamic Host Configuration Protocol) Server and Client.
- NAT (Network Address Translation).
- ICMP (Internet Control Message Protocol).
Security

- User authentication for PPP.
- PAP (Password Authentication Protocol) , CHAP (Challenge Authentication Protocol).
- Password protected system management.
802.11b INTERFACE
- Support Intersil PRISM (Currently) and Atmel RFMD (Optional ) - based designs.
- Wi-Fi ready.
- Connects to an 802.11b PCMCIA card.
- 128-bit and 64-bit WEP support.
Hardware Interface
- USB 1.1 Compliant.
- One RJ-11 port for ADSL line connection.
- Four RJ-45 port for LAN connection.
- One PCMCIA slot for 802.11b WLAN card connection.
- Provides 12V/1A DC Adaptor.
- RS-232 Console port (Optional).
SYSTEM REQUIREMENT (FOR USB CONNECTION ONLY)
- Windows 98SE/2000/ME/XP Operation System.
- Pentium 166 MHz MMX-compatible PC or greater; 32 Mbytes RAM or more; 50 Mbytes free disk space or more.
- Driver and Code upgraded via Amigo's website
Approval
- FCC Part 15/68, CE, K.21, EN60950 3rd Ed.